Very nice truck and a nice patch but nevertheless, there are a few small things on the steering column, such as the position of the ignition key or the turn signal switch. Also, I don't quite understand why the engine model for the in-line 6 cylinder is that of the V10. But still a very good
Nope i have seen in real life an 19.463 with this, as construction Version. This is Sure possible. But most you are right is the Air intake under the Front bumper
Danke XBS ich ade mir morgen früh das Update für den Wahnsinns LKW. Wie gesagt ich wünsche mit noch die Radkappen auf allen Achsen ubd Chassis Optionen und evtl für Auflieger. Nen ganzer Zug damit sieht einfach mega aus... Das V10 hat mir nun quasi vorweg genommen, geile Sache. Wollte das als Skin machen, zwar auf die linke Seite um auch rechts F2000 stehen zu haben. Evtl wäre mit dem alten Grill zu überlegen ob man evtl noch den normalen F2000 Schriftzug macht also ohne Evolution. Also die erste Serie des F2000. Für die Sonnenblende gab es damals auch am Anfang den Schriftzug "Truck of the Year 95" Ab und an Stand da auch mal sowas wie Varioline drauf. Wobei ich da bis heute nicht weiß wieso. Wie schon andere geschrieben haben, nen Swap Chassis wie das vom Sebastian wäre noch ne schöne Sache... aber sonst... Lederlenkrad, ja leck mich fett, der Wagen ist einfach mega hammer. Danke dir nochmal für deine Arbeit ubd Zeit damit. Bleib gesund und weiter so. Dein MAN für mich jetzt schon Best Mod 22 da ich einfach damit groß geworden bin.
Da kann ich mich nur anschließen :) Ich bin auch mit dem groß geworden aber mit dem alten, also nich den Evo. Bin damals wechselbrücke gefahren mit nem 463 :-) Du hast da nen Punkt angesprochen den ich sehr gut finde, abgesehen vom swap Packlage. Das mit dem Aufkleber. Da man ja eben auch die vor Evo Modelle auswählen kann von der Motorisierung wäre es klasse wenn es den F2000 Aufkleber auch ohne dem Evo geben würde ^^
Hello Master! VFA 8x4 chassis,heavy load after coupling the front wheel does not turn. It stays in one place. If no load is attached,the wheel turns fine. What could be the problem? I have the same problem with SCS wheels and 50k wheels. The tire is the truck mod accessory Toyo. (v1.0.1) https://pasteboard.co/o9EpT8lOQaQI.jpg (deepl translate)
thank you for the update. I found a little thing which isnt entirely correct. The V10 sticker on the passenger side is absolutely on spot for the original 1995 F2000 but the Evo had this sticker on the driver side together with the evo sticker on the passenger side.
2 of your 3 photos show a F2000 from 1995 and as i said this version had the V10 sticker exactly where XBS modeled it in. But im talking about the Evo from 1998. Havent you take a closer look to my link?
Hi XBS, Are you going to update your other mods? I would really apreciate Volvo F88 to be updated to newer game version, but also all 3 DAF trucks, Sisu and Mercedes SK would be great. I'm a big fan of your work and I would like to be able to play with your mods with the newest game updates.
Indicated issues have been resolved. Thanks for the update. This beautiful well-crafted mod works divinely perfect without any problem now. Curious to know what your future work and delivery will be...
Thanks for the new update and adding my MAN front mudflaps wish bro, this is absolutely best mod you have ever made for ETS-2 ;) I hope you can update your other great trucks for 1.43 too, especially I miss the Swedish Legend VOLVO F-88&89 so much :)
big thx for the update XBS! I love that truck and all the unique little gimicks that come with every truck mod,thank you for everything you give to the community.greetings Zippe
The old one he released i pretty much already have it working including seperate pieces front cooler 2 variants Chrome and paint reardoor chrome and paint roof Chrome and paint And bottom part Chrome and paint option https://forum.scssoft.com/viewtopic.php?t=255921
XBS, thank you for updating and correcting the problems expressed, but unfortunately you missed one - the "transparent" roof. When viewed from the outside in the interior of the truck, you can see absolutely everything that is installed on the roof on all types of roofs. Please fix it before it's too late -_____- By the way, the same problem is present on your MB SK and DA NTT..
Wow. That was totally unexpected XBS! One of few modders who hears community about criticism and issues reporting of their mods. And He solves them! :) You are the true gentleman!
Hello XBS, the 8x4 chassis is an option I was waiting for so long, thank you for bringing it (back) into the game. If you could make the chassis paintable like (the heavy tower), that would be marvellous :)
Hello XBS! Change the size of the fuel tank in the chassis file "4x2v.sii". The prescription is 680 + 340, it should be 1020, but the prescription is 680.
Thx again for your great Job @XBS
ReplyDeleteIs there a chance to make him work for Sebastian´s Swap carrier Pack? That would be amazing :-)
Xbs danke schön für so schnelle Fehler Behebung. Du bist einfach der Hammer
ReplyDeleteOh you are so fast dear XBS. Thank you for this legendary Truck and all the effort you put in there! ❤️
ReplyDeletethanks, you are the best
ReplyDeleteXBS thank you for your work. Please update all masterpieces for version 1.43
ReplyDelete
ReplyDeleteVery nice truck and a nice patch but nevertheless, there are a few small things on the steering column, such as the position of the ignition key or the turn signal switch. Also, I don't quite understand why the engine model for the in-line 6 cylinder is that of the V10. But still a very good
*mod
DeleteXBS will you make a different kind of bumper for this truck?
ReplyDeleteThanks again for a great truck!
This comment has been removed by the author.
ReplyDeleteNope i have seen in real life an 19.463 with this, as construction Version. This is Sure possible. But most you are right is the Air intake under the Front bumper
DeleteThis comment has been removed by the author.
ReplyDeletePlease please please please make silent model please xbs please
ReplyDeleteI have an idea for you to make the sun shades movable (with interior tuning). I think it's a nice and beautiful little thing
ReplyDeleteDanke XBS ich ade mir morgen früh das Update für den Wahnsinns LKW.
ReplyDeleteWie gesagt ich wünsche mit noch die Radkappen auf allen Achsen ubd Chassis Optionen und evtl für Auflieger. Nen ganzer Zug damit sieht einfach mega aus...
Das V10 hat mir nun quasi vorweg genommen, geile Sache. Wollte das als Skin machen, zwar auf die linke Seite um auch rechts F2000 stehen zu haben.
Evtl wäre mit dem alten Grill zu überlegen ob man evtl noch den normalen F2000 Schriftzug macht also ohne Evolution. Also die erste Serie des F2000. Für die Sonnenblende gab es damals auch am Anfang den Schriftzug "Truck of the Year 95"
Ab und an Stand da auch mal sowas wie Varioline drauf. Wobei ich da bis heute nicht weiß wieso.
Wie schon andere geschrieben haben, nen Swap Chassis wie das vom Sebastian wäre noch ne schöne Sache... aber sonst... Lederlenkrad, ja leck mich fett, der Wagen ist einfach mega hammer. Danke dir nochmal für deine Arbeit ubd Zeit damit. Bleib gesund und weiter so. Dein MAN für mich jetzt schon Best Mod 22 da ich einfach damit groß geworden bin.
Da kann ich mich nur anschließen :) Ich bin auch mit dem groß geworden aber mit dem alten, also nich den Evo. Bin damals wechselbrücke gefahren mit nem 463 :-) Du hast da nen Punkt angesprochen den ich sehr gut finde, abgesehen vom swap Packlage. Das mit dem Aufkleber. Da man ja eben auch die vor Evo Modelle auswählen kann von der Motorisierung wäre es klasse wenn es den F2000 Aufkleber auch ohne dem Evo geben würde ^^
DeletePlease make xbs narrow wing second option
ReplyDeleteYour mod has written history, well done !!! We are looking forward to your next project !!!
ReplyDeleteHello Master! VFA 8x4 chassis,heavy load after coupling the front wheel does not turn. It stays in one place. If no load is attached,the wheel turns fine. What could be the problem? I have the same problem with SCS wheels and 50k wheels. The tire is the truck mod accessory Toyo. (v1.0.1) https://pasteboard.co/o9EpT8lOQaQI.jpg (deepl translate)
ReplyDeleteHi XBS,
ReplyDeletethank you for the update. I found a little thing which isnt entirely correct. The V10 sticker on the passenger side is absolutely on spot for the original 1995 F2000 but the Evo had this sticker on the driver side together with the evo sticker on the passenger side.
https://m.facebook.com/photo.php?fbid=1288292024669857&id=735214539977611&set=a.735230883309310
https://inf.news/en/auto/9124f74202eb82eae7d02676a8ffdd5d.html https://www.flickr.com/photos/smallwarrior/3801268351 https://www.flickr.com/photos/bonsaitruck/50641578972
Delete2 of your 3 photos show a F2000 from 1995 and as i said this version had the V10 sticker exactly where XBS modeled it in. But im talking about the Evo from 1998. Havent you take a closer look to my link?
Deletevery nice. The inside height seems to be fixed :)
ReplyDeleteHi XBS,
ReplyDeleteAre you going to update your other mods? I would really apreciate Volvo F88 to be updated to newer game version, but also all 3 DAF trucks, Sisu and Mercedes SK would be great. I'm a big fan of your work and I would like to be able to play with your mods with the newest game updates.
Indicated issues have been resolved. Thanks for the update. This beautiful well-crafted mod works divinely perfect without any problem now. Curious to know what your future work and delivery will be...
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThanks for the new update and adding my MAN front mudflaps wish bro, this is absolutely best mod you have ever made for ETS-2 ;) I hope you can update your other great trucks for 1.43 too, especially I miss the Swedish Legend VOLVO F-88&89 so much :)
ReplyDeleteXBS thanks for more excellent quality classic truck. But once again to ask for FLC upgrade, you've given us better ATS truck. Update FLC please!
ReplyDeletebig thx for the update XBS! I love that truck and all the unique little gimicks that come with every truck mod,thank you for everything you give to the community.greetings Zippe
ReplyDeleteHey xbs i m working on your kassbohrer and wanna ask may i rework it to make it compatible with ownership officially
ReplyDeleteSecond question is may i post it on the steamworkshop?
Which kassbohrer type on you work?
DeleteThe old one he released i pretty much already have it working including seperate pieces
Deletefront cooler
2 variants Chrome and paint
reardoor chrome and paint
roof Chrome and paint
And bottom part Chrome and paint option
https://forum.scssoft.com/viewtopic.php?t=255921
XBS, thank you for updating and correcting the problems expressed, but unfortunately you missed one - the "transparent" roof. When viewed from the outside in the interior of the truck, you can see absolutely everything that is installed on the roof on all types of roofs. Please fix it before it's too late -_____- By the way, the same problem is present on your MB SK and DA NTT..
ReplyDelete1) http://vfl.ru/fotos/706bafd638043497.html
2) http://vfl.ru/fotos/c88c61b038043498.html
3) http://vfl.ru/fotos/5c42545838043500.html
thanks for the update XBS i even made a greek skin for it
ReplyDeleteXbs please silent narrow wings
ReplyDeletePictures for help:
http://vfl.ru/fotos/c4ba1b7438044135.html
Are you using google translate? Your photo shows a rear fender which was not avaiable for the F2000. Aftermarket changes does not count.
DeleteAll I know that Dormar fenders was an option but it was in some countries only.
I meant the new option
Deletehttp://vfl.ru/fotos/37612a0238050504.html
http://vfl.ru/fotos/4a883b0f38050534.html
Deletehttp://vfl.ru/fotos/5c7866d138050552.html
DeleteWow. That was totally unexpected XBS! One of few modders who hears community about criticism and issues reporting of their mods. And He solves them! :)
ReplyDeleteYou are the true gentleman!
Best regards!
1.0.1 Why were three headlight options lost in the update?
ReplyDeletehow do you mean?
Deletei still have the same 3 headlight options as the first version
I viewed updated version on youtube and tuning time lights option is dissapeared
DeleteDann schick doch mal den link on dem Video
Delete[img]https://media.discordapp.net/attachments/899321592994218004/941272542495256646/ets2_20220210_102813_00.png[/img]
ReplyDeleteI love my F2000 Evo 😆
Hello XBS, thanks for update but the 6x2 midlift chassis still not having trailer cables?
ReplyDeleteCan you look at it please?
Thank you
https://imgur.com/HKpZU2I
Dear XBS!!! Could you do a "Volvo F-Series" tractor? :-)))
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteHello XBS,
ReplyDeletethe 8x4 chassis is an option I was waiting for so long, thank you for bringing it (back) into the game.
If you could make the chassis paintable like (the heavy tower), that would be marvellous :)
Hello XBS!
ReplyDeleteChange the size of the fuel tank in the chassis file "4x2v.sii". The prescription is 680 + 340, it should be 1020, but the prescription is 680.
This comment has been removed by the author.
ReplyDeleteDoes anyone else have a weird flicker on the left little window on the cabin? How can it be solved? Thanks!
ReplyDeleteIt seems to be connected with NPI AA settings... Any workaround?
DeleteThis comment has been removed by the author.
DeleteI wrote somewhere that I need to fix the glass mats.
DeleteThis comment has been removed by the author.
ReplyDeleteHi XBS!!! Will there be an update for 1.45? The game log swears at the animation in the interior ".pma"
ReplyDelete